Driveways and paths · Tyne and Wear

Tarmac paths and footpaths in Gosforth

Tarmac paths and footpaths in Gosforth start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

GOSFORTH GUIDE£51–£84 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Gosforth?

Local guide rates for Gosforth (the North East, about 7% below our UK midpoint):

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£51–£84 per m²
Example: 10 m² path£610–£1,000
Example: 20 m² path£1,150–£1,850
Example: 40 m² path£2,050–£3,350

As a 2026 guide in Gosforth, tarmac path work runs at about £51–£84 per m² including VAT, so a 40 m² path is roughly £2,050–£3,350. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Gosforth

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Where we work in and around Gosforth

What applies in Gosforth. We cover Gosforth by grouping surveys with nearby Tyne and Wear jobs; Newcastle upon Tyne is 2 miles away.

Postcodes
NE2, NE3, NE7, NE12, NE13
Area
Tyne and Wear
Nearest towns
Newcastle upon Tyne (2 miles), Gateshead (3 miles), Wallsend (3 miles), Felling (4 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Newcastle upon Tyne, Gateshead, Wallsend, Felling, Hebburn.

Questions about tarmac paths in Gosforth

What approvals apply in Gosforth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Gosforth free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Gosforth postcodes do you cover?

We cover Gosforth including NE2, NE3, NE7, NE12, NE13, and nearby Newcastle upon Tyne, Gateshead, Wallsend.

How much does a tarmac path cost in Gosforth?

As a 2026 guide in Gosforth, tarmac path work runs at about £51–£84 per m² including VAT, so a 40 m² path is roughly £2,050–£3,350. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Gosforth

Questions about tarmac paths in Gosforth? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tarmac paths and footpaths in Gosforth: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price