Tar and chip driveways in Gosforth

Tar and chip driveway prices in Gosforth

Guide prices below are for Gosforth, adjusted for the North East, where surfacing rates run about 7% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£42–£70 per m²
Example: 50 m² drive	£2,100–£3,500
Example: 100 m² drive	£4,200–£7,000
Example: 200 m² drive	£7,950–£13,250

As a 2026 guide in Gosforth, tar and chip driveway work runs at about £42–£70 per m² including VAT, so a 100 m² drive is roughly £4,200–£7,000. Guide only; the survey confirms a fixed price.

Covering Gosforth

The key facts for Gosforth. Smaller towns such as Gosforth are surveyed alongside nearby jobs in Tyne and Wear.

Postcodes: NE2, NE3, NE7, NE12, NE13
Area: Tyne and Wear
Nearest towns: Newcastle upon Tyne (2 miles), Gateshead (3 miles), Wallsend (3 miles), Felling (4 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

Close to Gosforth: Newcastle upon Tyne, Gateshead, Wallsend, Felling, Hebburn.

Planning and kerb rules for Gosforth

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in
Second coat where a double dressing is specified

Gosforth: common questions

What approvals apply in Gosforth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Gosforth?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Gosforth?

We cover Gosforth including NE2, NE3, NE7, NE12, NE13, and nearby Newcastle upon Tyne, Gateshead, Wallsend.

Tar and chip driveway cost in Gosforth: what should I budget?

As a 2026 guide in Gosforth, tar and chip driveway work runs at about £42–£70 per m² including VAT, so a 100 m² drive is roughly £4,200–£7,000. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Gosforth

Ready for a price in Gosforth? Use the guide price tool or send the form, and we'll arrange a visit.