Driveways and paths · Tyne and Wear

Permeable tarmac driveways in Gosforth

A good permeable tarmac driveway in Gosforth looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

GOSFORTH GUIDE£74–£116 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

What does a permeable tarmac driveway cost in Gosforth?

For Gosforth, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£74–£116 per m²
Example: 30 m² drive£2,450–£3,850
Example: 50 m² drive£3,700–£5,800
Example: 80 m² drive£5,950–£9,300

As a 2026 guide in Gosforth, permeable tarmac driveway work runs at about £74–£116 per m² including VAT, so a 80 m² drive is roughly £5,950–£9,300. Guide only; the survey confirms a fixed price.

How it is built

Surface courseporous asphalt, open-gradedBinder courseporous asphalt baseStorage layeropen-graded Type 3 or 4/20 stone, depth to suitFormationgeotextile on the subsoilINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a permeable tarmac driveway?

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

  • Ground check: how fast does the soil drain?
  • Open-graded permeable sub-base, often Type 3 or 4/20 stone
  • Porous asphalt binder and surface courses
  • Overflow to a soakaway or border on slow-draining ground
  • Edge restraint that does not block the flow

Rules that apply in Gosforth

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Gosforth

Gosforth at a glance. Gosforth is covered on our Tyne and Wear rounds, 2 miles from Newcastle upon Tyne.

Postcodes
NE2, NE3, NE7, NE12, NE13
Area
Tyne and Wear
Nearest towns
Newcastle upon Tyne (2 miles), Gateshead (3 miles), Wallsend (3 miles), Felling (4 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Newcastle upon Tyne, Gateshead, Wallsend, Felling, Hebburn.

Your questions answered

Do I need permission for a permeable tarmac driveway in Gosforth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a permeable tarmac driveway in Gosforth?

As a 2026 guide in Gosforth, permeable tarmac driveway work runs at about £74–£116 per m² including VAT, so a 80 m² drive is roughly £5,950–£9,300. Edging, drainage and a dropped kerb are priced separately where needed.

Which Gosforth postcodes do you cover?

We cover Gosforth including NE2, NE3, NE7, NE12, NE13, and nearby Newcastle upon Tyne, Gateshead, Wallsend.

How long will the work take at my Gosforth property?

Usually 3–5 working days. We book Gosforth surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

More we do in Gosforth

Ready for a price in Gosforth? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Permeable tarmac driveways in Gosforth: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price