New tarmac driveways in Gosforth

New tarmac driveway prices in Gosforth

For Gosforth, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£56–£88 per m²
Example: 30 m² drive	£1,850–£2,900
Example: 50 m² drive	£2,800–£4,400
Example: 80 m² drive	£4,450–£7,050

As a 2026 guide in Gosforth, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Guide only; the survey confirms a fixed price.

Covering Gosforth

Gosforth at a glance. Gosforth is covered on our Tyne and Wear rounds, 2 miles from Newcastle upon Tyne.

Postcodes: NE2, NE3, NE7, NE12, NE13
Area: Tyne and Wear
Nearest towns: Newcastle upon Tyne (2 miles), Gateshead (3 miles), Wallsend (3 miles), Felling (4 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Newcastle upon Tyne, Gateshead, Wallsend, Felling, Hebburn.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Layer by layer

Do I need permission in Gosforth?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

New tarmac driveway cost in Gosforth: what should I budget?

As a 2026 guide in Gosforth, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Gosforth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Gosforth?

We cover Gosforth including NE2, NE3, NE7, NE12, NE13, and nearby Newcastle upon Tyne, Gateshead, Wallsend.

How quickly can work start in Gosforth?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Gosforth surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

Also in Gosforth

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Gosforth.