New tarmac driveways in Wallsend

What does a new tarmac driveway cost in Wallsend?

Local guide rates for Wallsend (the North East, about 7% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£56–£88 per m²
Example: 30 m² drive	£1,850–£2,900
Example: 50 m² drive	£2,800–£4,400
Example: 80 m² drive	£4,450–£7,050

As a 2026 guide in Wallsend, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Guide only; the survey confirms a fixed price.

Layer by layer

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Covering Wallsend

Survey cover and pricing for Wallsend. We reach Wallsend on our Tyne and Wear survey days; Newcastle upon Tyne is 3 miles away.

Postcodes: NE28, NE6
Area: Tyne and Wear
Nearest towns: Hebburn (1 mile), Jarrow (2 miles), Felling (3 miles), Gosforth (3 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

Close to Wallsend: Hebburn, Jarrow, Felling, Gosforth, Gateshead.

Do I need permission in Wallsend?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

How much does a new tarmac driveway cost in Wallsend?

As a 2026 guide in Wallsend, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Wallsend?

We cover Wallsend including NE28, NE6, and nearby Hebburn, Jarrow, Felling.

Do I need permission for a new tarmac driveway in Wallsend?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Wallsend?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Wallsend

Questions about new tarmac driveways in Wallsend? Call, WhatsApp or use the form, and we'll talk it through.