Tarmac driveway resurfacing in Wallsend

What does tarmac resurfacing cost in Wallsend?

For Wallsend, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£23–£42 per m²
Example: 30 m² drive	£770–£1,400
Example: 50 m² drive	£1,150–£2,100
Example: 80 m² drive	£1,850–£3,350

As a 2026 guide in Wallsend, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 80 m² drive is roughly £1,850–£3,350. Guide only; the survey confirms a fixed price.

Wallsend: the local details

Survey cover and pricing for Wallsend. Wallsend sits 3 miles from Newcastle upon Tyne, within our regular Tyne and Wear cover.

Postcodes: NE28, NE6
Area: Tyne and Wear
Nearest towns: Hebburn (1 mile), Jarrow (2 miles), Felling (3 miles), Gosforth (3 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Hebburn, Jarrow, Felling, Gosforth, Gateshead.

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

Survey of the existing base: sinking, rutting, loose edges and drainage
Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
New surface course, typically 25–40 mm, laid hot and rolled
Edges sealed and joints to existing surfaces cut neatly

The build-up we price

Do I need permission in Wallsend?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Wallsend: common questions

Which Wallsend postcodes do you cover?

We cover Wallsend including NE28, NE6, and nearby Hebburn, Jarrow, Felling.

What approvals apply in Wallsend?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does tarmac resurfacing take in Wallsend?

Often 1–2 days for a typical drive. We book Wallsend surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Wallsend?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Wallsend

Tell us what you have in mind for Wallsend and we'll book a survey and put the specification in writing.