Driveways and paths · Tyne and Wear

Tarmac driveway resurfacing in Gosforth

Homeowners in Gosforth ask us about tarmac resurfacing jobs for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

GOSFORTH GUIDE£23–£42 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Gosforth?

For Gosforth, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£23–£42 per m²
Example: 30 m² drive£770–£1,400
Example: 50 m² drive£1,150–£2,100
Example: 80 m² drive£1,850–£3,350

As a 2026 guide in Gosforth, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 80 m² drive is roughly £1,850–£3,350. Guide only; the survey confirms a fixed price.

Gosforth: the local details

Gosforth at a glance. Smaller towns such as Gosforth are surveyed alongside nearby jobs in Tyne and Wear.

Postcodes
NE2, NE3, NE7, NE12, NE13
Area
Tyne and Wear
Nearest towns
Newcastle upon Tyne (2 miles), Gateshead (3 miles), Wallsend (3 miles), Felling (4 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Newcastle upon Tyne, Gateshead, Wallsend, Felling, Hebburn.

Planning and kerb rules for Gosforth

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

The build-up we price

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

Are there planning or highway rules in Gosforth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Gosforth?

We cover Gosforth including NE2, NE3, NE7, NE12, NE13, and nearby Newcastle upon Tyne, Gateshead, Wallsend.

How long does tarmac resurfacing take in Gosforth?

Often 1–2 days for a typical drive. We book Gosforth surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

Tarmac resurfacing cost in Gosforth: what should I budget?

As a 2026 guide in Gosforth, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 80 m² drive is roughly £1,850–£3,350. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Gosforth

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Gosforth.

Free survey for new surfacing

Tarmac driveway resurfacing in Gosforth: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price