New tarmac driveways in Newcastle upon Tyne
We survey and price new tarmac driveways across Newcastle upon Tyne and the NE1, NE4 postcodes, with every layer and its depth written into the quote.

New tarmac driveway prices in Newcastle upon Tyne
These Newcastle upon Tyne guide prices reflect rates in the North East, about 7% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £56–£88 per m² |
| Example: 30 m² drive | £1,850–£2,900 |
| Example: 50 m² drive | £2,800–£4,400 |
| Example: 80 m² drive | £4,450–£7,050 |
As a 2026 guide in Newcastle upon Tyne, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Guide only; the survey confirms a fixed price.
Newcastle upon Tyne: the local details
The key facts for Newcastle upon Tyne. Newcastle upon Tyne is one of the bigger places we cover in Tyne and Wear, so survey slots come round regularly.
- Postcodes
- NE1, NE4
- Area
- Tyne and Wear
- Nearest towns
- Gateshead (1 mile), Gosforth (2 miles), Felling (2 miles), Whickham (3 miles)
- Pricing
- North East, about 7% below our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Gateshead, Gosforth, Felling, Whickham, Wallsend.
Do I need permission in Newcastle upon Tyne?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Layer by layer
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Dig to formation level, usually around 230–250 mm below finished height
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Newcastle upon Tyne: common questions
New tarmac driveway cost in Newcastle upon Tyne: what should I budget?
As a 2026 guide in Newcastle upon Tyne, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Edging, drainage and a dropped kerb are priced separately where needed.
Are there planning or highway rules in Newcastle upon Tyne?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Is the survey in Newcastle upon Tyne free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which Newcastle upon Tyne postcodes do you cover?
We cover Newcastle upon Tyne including NE1, NE4, and nearby Gateshead, Gosforth, Felling.
Also in Newcastle upon Tyne
- Tarmac driveway repairs
- Tar and chip driveways
- Tarmac driveway resurfacing
- Car park surfacing
- Private and access road surfacing
- Red tarmac driveways
- Everything in Newcastle upon Tyne
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Newcastle upon Tyne.
New tarmac driveways in Newcastle upon Tyne: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED