Driveways and paths · Tyne and Wear

Tarmac paths and footpaths in Hebburn

Planning a tarmac path in Hebburn? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

HEBBURN GUIDE£51–£84 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Hebburn?

These Hebburn guide prices reflect rates in the North East, about 7% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£51–£84 per m²
Example: 10 m² path£610–£1,000
Example: 20 m² path£1,150–£1,850
Example: 40 m² path£2,050–£3,350

As a 2026 guide in Hebburn, tarmac path work runs at about £51–£84 per m² including VAT, so a 40 m² path is roughly £2,050–£3,350. Guide only; the survey confirms a fixed price.

Where we work in and around Hebburn

What applies in Hebburn. Hebburn is covered on our Tyne and Wear rounds, 4 miles from Newcastle upon Tyne.

Postcodes
NE31
Area
Tyne and Wear
Nearest towns
Jarrow (1 mile), Wallsend (1 mile), Felling (3 miles), Gateshead (4 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Jarrow, Wallsend, Felling, Gateshead, South Shields.

Rules that apply in Hebburn

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tarmac paths in Hebburn

Do I need permission for a tarmac path in Hebburn?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Hebburn?

We cover Hebburn including NE31, and nearby Jarrow, Wallsend, Felling.

How long does a tarmac path take in Hebburn?

Often 1–2 days. We book Hebburn surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

How much does a tarmac path cost in Hebburn?

As a 2026 guide in Hebburn, tarmac path work runs at about £51–£84 per m² including VAT, so a 40 m² path is roughly £2,050–£3,350. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Hebburn

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Hebburn.

Free survey for new surfacing

Tarmac paths and footpaths in Hebburn: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price