Driveways and paths · Somerset

Tarmac paths and footpaths in Burnham-on-Sea

Homeowners in Burnham-on-Sea ask us about tarmac paths for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

BURNHAM-ON-SEA GUIDE£57–£93 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Burnham-on-Sea

Guide prices below are for Burnham-on-Sea, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£57–£93 per m²
Example: 10 m² path£680–£1,100
Example: 20 m² path£1,250–£2,050
Example: 40 m² path£2,250–£3,700

As a 2026 guide in Burnham-on-Sea, tarmac path work runs at about £57–£93 per m² including VAT, so a 20 m² path is roughly £1,250–£2,050. Guide only; the survey confirms a fixed price.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a tarmac path

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Do I need permission in Burnham-on-Sea?

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Burnham-on-Sea: the local details

Burnham-on-Sea at a glance. Burnham-on-Sea is covered on our Somerset rounds, 29 miles from Bath.

Postcodes
TA8, TA9
Area
Somerset
Nearest towns
Weston-super-Mare (7 miles), Bridgwater (8 miles), Clevedon (15 miles), Taunton (16 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Weston-super-Mare, Bridgwater, Clevedon, Taunton, Nailsea.

Questions about tarmac paths in Burnham-on-Sea

How long does a tarmac path take in Burnham-on-Sea?

Often 1–2 days. We book Burnham-on-Sea surveys alongside other jobs in Somerset, and give you dates once the specification is agreed.

Do I need permission for a tarmac path in Burnham-on-Sea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tarmac path cost in Burnham-on-Sea: what should I budget?

As a 2026 guide in Burnham-on-Sea, tarmac path work runs at about £57–£93 per m² including VAT, so a 20 m² path is roughly £1,250–£2,050. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Burnham-on-Sea?

We cover Burnham-on-Sea including TA8, TA9, and nearby Weston-super-Mare, Bridgwater, Clevedon.

Also in Burnham-on-Sea

Ready for a price in Burnham-on-Sea? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Burnham-on-Sea: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price