Tarmac paths and footpaths in Bridgwater

Tarmac path prices in Bridgwater

For Bridgwater, we apply the South West rate, about 3% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£57–£93 per m²
Example: 10 m² path	£680–£1,100
Example: 20 m² path	£1,250–£2,050
Example: 40 m² path	£2,250–£3,700

As a 2026 guide in Bridgwater, tarmac path work runs at about £57–£93 per m² including VAT, so a 10 m² path is roughly £680–£1,100. Guide only; the survey confirms a fixed price.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

How it is built

Covering Bridgwater

Bridgwater at a glance. Bridgwater sits 33 miles from Bath, within our regular Somerset cover.

Postcodes: TA6, TA7, TA5
Area: Somerset
Nearest towns: Burnham-on-Sea (8 miles), Taunton (9 miles), Weston-super-Mare (15 miles), Yeovil (21 miles)
Pricing: South West, about 3% above our UK midpoint
Kerb approvals: The highway authority

Close to Bridgwater: Burnham-on-Sea, Taunton, Weston-super-Mare, Yeovil, Clevedon.

Do I need permission in Bridgwater?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Bridgwater: common questions

Is the survey in Bridgwater free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tarmac path in Bridgwater?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a tarmac path in Bridgwater?

As a 2026 guide in Bridgwater, tarmac path work runs at about £57–£93 per m² including VAT, so a 10 m² path is roughly £680–£1,100. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Bridgwater?

Often 1–2 days. We book Bridgwater surveys alongside other jobs in Somerset, and give you dates once the specification is agreed.

Also in Bridgwater

Tell us what you have in mind for Bridgwater and we'll book a survey and put the specification in writing.