Driveways and paths · Somerset

Tarmac paths and footpaths in Weston-super-Mare

For tarmac paths in Weston-super-Mare, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

WESTON-SUPER-MARE GUIDE£57–£93 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Weston-super-Mare?

Guide prices below are for Weston-super-Mare, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£57–£93 per m²
Example: 10 m² path£680–£1,100
Example: 20 m² path£1,250–£2,050
Example: 40 m² path£2,250–£3,700

As a 2026 guide in Weston-super-Mare, tarmac path work runs at about £57–£93 per m² including VAT, so a 40 m² path is roughly £2,250–£3,700. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Weston-super-Mare

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Weston-super-Mare: the local details

What applies in Weston-super-Mare. As one of the larger towns in Somerset, Weston-super-Mare sees regular survey visits.

Postcodes
BS23, BS22, BS24, BS29
Area
Somerset
Nearest towns
Burnham-on-Sea (7 miles), Clevedon (8 miles), Nailsea (11 miles), Portishead (13 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Burnham-on-Sea, Clevedon, Nailsea, Portishead, Bridgwater.

Questions about tarmac paths in Weston-super-Mare

Can I get a free survey in Weston-super-Mare?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Weston-super-Mare?

We cover Weston-super-Mare including BS23, BS22, BS24, BS29, and nearby Burnham-on-Sea, Clevedon, Nailsea.

Do I need permission for a tarmac path in Weston-super-Mare?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a tarmac path in Weston-super-Mare?

As a 2026 guide in Weston-super-Mare, tarmac path work runs at about £57–£93 per m² including VAT, so a 40 m² path is roughly £2,250–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Weston-super-Mare

Tell us what you have in mind for Weston-super-Mare and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Weston-super-Mare: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price