Driveways and paths · Somerset

Red tarmac driveways in Bridgwater

Red tarmac driveways in Bridgwater start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

BRIDGWATER GUIDE£77–£118 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Bridgwater?

Local guide rates for Bridgwater (the South West, about 3% above our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£77–£118 per m²
Example: 30 m² drive£2,550–£3,900
Example: 50 m² drive£3,850–£5,900
Example: 80 m² drive£6,200–£9,500

As a 2026 guide in Bridgwater, red tarmac driveway work runs at about £77–£118 per m² including VAT, so a 50 m² drive is roughly £3,850–£5,900. Guide only; the survey confirms a fixed price.

What is included in a red tarmac driveway?

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering

Where we work in and around Bridgwater

The key facts for Bridgwater. We reach Bridgwater on our Somerset survey days; Bath is 33 miles away.

Postcodes
TA6, TA7, TA5
Area
Somerset
Nearest towns
Burnham-on-Sea (8 miles), Taunton (9 miles), Weston-super-Mare (15 miles), Yeovil (21 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Burnham-on-Sea, Taunton, Weston-super-Mare, Yeovil, Clevedon.

Do I need permission in Bridgwater?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

How much does a red tarmac driveway cost in Bridgwater?

As a 2026 guide in Bridgwater, red tarmac driveway work runs at about £77–£118 per m² including VAT, so a 50 m² drive is roughly £3,850–£5,900. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Bridgwater?

We cover Bridgwater including TA6, TA7, TA5, and nearby Burnham-on-Sea, Taunton, Weston-super-Mare.

Do I need permission for a red tarmac driveway in Bridgwater?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Bridgwater?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Bridgwater

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Bridgwater.

Free survey for new surfacing

Red tarmac driveways in Bridgwater: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price