New tarmac driveways in Burnham-on-Sea

How much should I budget in Burnham-on-Sea?

Guide prices below are for Burnham-on-Sea, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£62–£98 per m²
Example: 30 m² drive	£2,050–£3,250
Example: 50 m² drive	£3,100–£4,900
Example: 80 m² drive	£4,950–£7,850

As a 2026 guide in Burnham-on-Sea, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 50 m² drive is roughly £3,100–£4,900. Guide only; the survey confirms a fixed price.

Covering Burnham-on-Sea

Burnham-on-Sea at a glance. Burnham-on-Sea is covered on our Somerset rounds, 29 miles from Bath.

Postcodes: TA8, TA9
Area: Somerset
Nearest towns: Weston-super-Mare (7 miles), Bridgwater (8 miles), Clevedon (15 miles), Taunton (16 miles)
Pricing: South West, about 3% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Weston-super-Mare, Bridgwater, Clevedon, Taunton, Nailsea.

Rules that apply in Burnham-on-Sea

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Burnham-on-Sea: common questions

How much does a new tarmac driveway cost in Burnham-on-Sea?

As a 2026 guide in Burnham-on-Sea, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 50 m² drive is roughly £3,100–£4,900. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Burnham-on-Sea?

We cover Burnham-on-Sea including TA8, TA9, and nearby Weston-super-Mare, Bridgwater, Clevedon.

What approvals apply in Burnham-on-Sea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Burnham-on-Sea?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Burnham-on-Sea surveys alongside other jobs in Somerset, and give you dates once the specification is agreed.

Other work in Burnham-on-Sea

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Burnham-on-Sea.