Tar and chip driveways in Conisbrough

How much should I budget in Conisbrough?

These Conisbrough guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£72 per m²
Example: 50 m² drive	£2,150–£3,600
Example: 100 m² drive	£4,300–£7,200
Example: 200 m² drive	£8,200–£13,700

As a 2026 guide in Conisbrough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 200 m² drive is roughly £8,200–£13,700. Guide only; the survey confirms a fixed price.

Rules that apply in Conisbrough

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Conisbrough

Conisbrough at a glance. Conisbrough is covered on our South Yorkshire rounds, 12 miles from Sheffield.

Postcodes: DN12
Area: South Yorkshire
Nearest towns: Mexborough (3 miles), Maltby (5 miles), Rawmarsh (5 miles), Wath-upon-Dearne (5 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Mexborough, Maltby, Rawmarsh, Wath-upon-Dearne, Bentley.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Chippings spread straight onto the binder
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Conisbrough: common questions

Which Conisbrough postcodes do you cover?

We cover Conisbrough including DN12, and nearby Mexborough, Maltby, Rawmarsh.

How long does a tar and chip driveway take in Conisbrough?

Often 1–3 days depending on base work. We book Conisbrough surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

How much does a tar and chip driveway cost in Conisbrough?

As a 2026 guide in Conisbrough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 200 m² drive is roughly £8,200–£13,700. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a tar and chip driveway in Conisbrough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Conisbrough

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Conisbrough.