Driveways and paths · South Yorkshire

New tarmac driveways in Conisbrough

New tarmac driveways in Conisbrough start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

CONISBROUGH GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Conisbrough?

These Conisbrough guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Conisbrough, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Guide only; the survey confirms a fixed price.

Covering Conisbrough

The key facts for Conisbrough. Smaller towns such as Conisbrough are surveyed alongside nearby jobs in South Yorkshire.

Postcodes
DN12
Area
South Yorkshire
Nearest towns
Mexborough (3 miles), Maltby (5 miles), Rawmarsh (5 miles), Wath-upon-Dearne (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Mexborough, Maltby, Rawmarsh, Wath-upon-Dearne, Bentley.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Conisbrough

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Your questions answered

What is the price of a new tarmac driveway in Conisbrough?

As a 2026 guide in Conisbrough, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Conisbrough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Conisbrough?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Conisbrough surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Is the survey in Conisbrough free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Conisbrough

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Conisbrough.

Free survey for new surfacing

New tarmac driveways in Conisbrough: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price