New tarmac driveways in Wath-upon-Dearne

What does a new tarmac driveway cost in Wath-upon-Dearne?

For Wath-upon-Dearne, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£91 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,900–£4,550
Example: 80 m² drive	£4,600–£7,300

As a 2026 guide in Wath-upon-Dearne, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.

Wath-upon-Dearne: the local details

What applies in Wath-upon-Dearne. Wath-upon-Dearne is covered on our South Yorkshire rounds, 10 miles from Sheffield.

Postcodes: S63
Area: South Yorkshire
Nearest towns: Mexborough (2 miles), Wombwell (2 miles), Rawmarsh (3 miles), Hoyland (4 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Mexborough, Wombwell, Rawmarsh, Hoyland, Conisbrough.

Planning and kerb rules for Wath-upon-Dearne

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

The build-up we price

Your questions answered

What is the price of a new tarmac driveway in Wath-upon-Dearne?

As a 2026 guide in Wath-upon-Dearne, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Wath-upon-Dearne property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Wath-upon-Dearne surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Wath-upon-Dearne?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Wath-upon-Dearne free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Wath-upon-Dearne

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Wath-upon-Dearne.