New tarmac driveways in Mexborough

What does a new tarmac driveway cost in Mexborough?

These Mexborough guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£91 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,900–£4,550
Example: 80 m² drive	£4,600–£7,300

As a 2026 guide in Mexborough, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Mexborough: the local details

The key facts for Mexborough. Mexborough is covered on our South Yorkshire rounds, 10 miles from Sheffield.

Postcodes: S64
Area: South Yorkshire
Nearest towns: Wath-upon-Dearne (2 miles), Conisbrough (3 miles), Rawmarsh (3 miles), Wombwell (5 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Close to Mexborough: Wath-upon-Dearne, Conisbrough, Rawmarsh, Wombwell, Rotherham.

Do I need permission in Mexborough?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Mexborough: common questions

Will someone visit before I get a fixed price in Mexborough?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a new tarmac driveway take in Mexborough?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Mexborough surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Do I need permission for a new tarmac driveway in Mexborough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Mexborough postcodes do you cover?

We cover Mexborough including S64, and nearby Wath-upon-Dearne, Conisbrough, Rawmarsh.

Other work in Mexborough

Ready for a price in Mexborough? Use the guide price tool or send the form, and we'll arrange a visit.