Tar and chip driveways in Mexborough

How much should I budget in Mexborough?

Guide prices below are for Mexborough, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£72 per m²
Example: 50 m² drive	£2,150–£3,600
Example: 100 m² drive	£4,300–£7,200
Example: 200 m² drive	£8,200–£13,700

As a 2026 guide in Mexborough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,600. Guide only; the survey confirms a fixed price.

Do I need permission in Mexborough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in
Loose surplus chippings swept up after a few days

Where we work in and around Mexborough

What applies in Mexborough. Smaller towns such as Mexborough are surveyed alongside nearby jobs in South Yorkshire.

Postcodes: S64
Area: South Yorkshire
Nearest towns: Wath-upon-Dearne (2 miles), Conisbrough (3 miles), Rawmarsh (3 miles), Wombwell (5 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Close to Mexborough: Wath-upon-Dearne, Conisbrough, Rawmarsh, Wombwell, Rotherham.

Your questions answered

What approvals apply in Mexborough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a tar and chip driveway take in Mexborough?

Often 1–3 days depending on base work. We book Mexborough surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

How much does a tar and chip driveway cost in Mexborough?

As a 2026 guide in Mexborough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,600. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Mexborough?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Mexborough

Tell us what you have in mind for Mexborough and we'll book a survey and put the specification in writing.