Tarmac paths and footpaths in Wath-upon-Dearne

Tarmac path prices in Wath-upon-Dearne

Guide prices below are for Wath-upon-Dearne, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£53–£86 per m²
Example: 10 m² path	£630–£1,050
Example: 20 m² path	£1,150–£1,900
Example: 40 m² path	£2,100–£3,450

As a 2026 guide in Wath-upon-Dearne, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

The build-up we price

Covering Wath-upon-Dearne

Survey cover and pricing for Wath-upon-Dearne. Smaller towns such as Wath-upon-Dearne are surveyed alongside nearby jobs in South Yorkshire.

Postcodes: S63
Area: South Yorkshire
Nearest towns: Mexborough (2 miles), Wombwell (2 miles), Rawmarsh (3 miles), Hoyland (4 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Mexborough, Wombwell, Rawmarsh, Hoyland, Conisbrough.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Planning and kerb rules for Wath-upon-Dearne

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Questions about tarmac paths in Wath-upon-Dearne

How long will the work take at my Wath-upon-Dearne property?

Often 1–2 days. We book Wath-upon-Dearne surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Do you cover all of Wath-upon-Dearne?

We cover Wath-upon-Dearne including S63, and nearby Mexborough, Wombwell, Rawmarsh.

Can I get a free survey in Wath-upon-Dearne?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tarmac path cost in Wath-upon-Dearne?

As a 2026 guide in Wath-upon-Dearne, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Wath-upon-Dearne

Ready for a price in Wath-upon-Dearne? Use the guide price tool or send the form, and we'll arrange a visit.