Driveways and paths · South Yorkshire

Tarmac paths and footpaths in Wombwell

Every tarmac path we price in Wombwell comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

WOMBWELL GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Wombwell

Local guide rates for Wombwell (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Wombwell, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

Covering Wombwell

What applies in Wombwell. Smaller towns such as Wombwell are surveyed alongside nearby jobs in South Yorkshire.

Postcodes
S73, S72
Area
South Yorkshire
Nearest towns
Wath-upon-Dearne (2 miles), Hoyland (3 miles), Barnsley (4 miles), Mexborough (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Wath-upon-Dearne, Hoyland, Barnsley, Mexborough, Rawmarsh.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Do I need permission in Wombwell?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tarmac paths in Wombwell

What approvals apply in Wombwell?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Wombwell free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Wombwell?

We cover Wombwell including S73, S72, and nearby Wath-upon-Dearne, Hoyland, Barnsley.

How much does a tarmac path cost in Wombwell?

As a 2026 guide in Wombwell, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Wombwell

Tell us what you have in mind for Wombwell and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Wombwell: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price