Driveways and paths · South Yorkshire

Red tarmac driveways in Conisbrough

A good red tarmac driveway in Conisbrough looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

CONISBROUGH GUIDE£72–£110 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Conisbrough?

Local guide rates for Conisbrough (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£72–£110 per m²
Example: 30 m² drive£2,400–£3,650
Example: 50 m² drive£3,600–£5,500
Example: 80 m² drive£5,750–£8,850

As a 2026 guide in Conisbrough, red tarmac driveway work runs at about £72–£110 per m² including VAT, so a 50 m² drive is roughly £3,600–£5,500. Guide only; the survey confirms a fixed price.

Do I need permission in Conisbrough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a red tarmac driveway

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Conisbrough: the local details

The key facts for Conisbrough. We cover Conisbrough by grouping surveys with nearby South Yorkshire jobs; Sheffield is 12 miles away.

Postcodes
DN12
Area
South Yorkshire
Nearest towns
Mexborough (3 miles), Maltby (5 miles), Rawmarsh (5 miles), Wath-upon-Dearne (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Conisbrough: Mexborough, Maltby, Rawmarsh, Wath-upon-Dearne, Bentley.

Questions about red tarmac driveways in Conisbrough

What is the price of a red tarmac driveway in Conisbrough?

As a 2026 guide in Conisbrough, red tarmac driveway work runs at about £72–£110 per m² including VAT, so a 50 m² drive is roughly £3,600–£5,500. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Conisbrough?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Conisbrough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a red tarmac driveway take in Conisbrough?

Usually 2–4 working days. We book Conisbrough surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Also in Conisbrough

Tell us what you have in mind for Conisbrough and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Conisbrough: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price