Tar and chip driveways in Maltby

What does a tar and chip driveway cost in Maltby?

These Maltby guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£72 per m²
Example: 50 m² drive	£2,150–£3,600
Example: 100 m² drive	£4,300–£7,200
Example: 200 m² drive	£8,200–£13,700

As a 2026 guide in Maltby, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 200 m² drive is roughly £8,200–£13,700. Guide only; the survey confirms a fixed price.

The build-up we price

Do I need permission in Maltby?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Where we work in and around Maltby

The key facts for Maltby. Smaller towns such as Maltby are surveyed alongside nearby jobs in South Yorkshire.

Postcodes: S66, DN11
Area: South Yorkshire
Nearest towns: Dinnington (3 miles), Conisbrough (5 miles), Rotherham (7 miles), Mexborough (7 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Dinnington, Conisbrough, Rotherham, Mexborough, Rawmarsh.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Chippings spread straight onto the binder
Rolled to bed the stones in
Second coat where a double dressing is specified

Questions about tar and chip driveways in Maltby

Can I get a free survey in Maltby?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Maltby?

Often 1–3 days depending on base work. We book Maltby surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Do I need permission for a tar and chip driveway in Maltby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a tar and chip driveway in Maltby?

As a 2026 guide in Maltby, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 200 m² drive is roughly £8,200–£13,700. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Maltby

Ready for a price in Maltby? Use the guide price tool or send the form, and we'll arrange a visit.