Car park resurfacing in Maltby
For car park resurfacing jobs in Maltby, the survey decides whether patching, an overlay, an inlay or a rebuild is the right spend, and the quote shows each option.

Car park resurfacing prices in Maltby
For Maltby, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (ex VAT) |
|---|---|
| Car park resurfacing: tack coat and 40 mm surface course overlay | £19–£34 per m² (£23–£41 inc VAT) |
| Plane and inlay: plane off worn surface, 40 mm new surface course | £25–£40 per m² (£30–£48 inc VAT) |
| Example: 200 m² car park | £3,850–£6,700 (£4,600–£8,050 inc VAT) |
| Example: 500 m² car park | £9,600–£16,800 (£11,500–£20,150 inc VAT) |
| Example: 1,000 m² car park | £17,650–£30,900 (£21,200–£37,100 inc VAT) |
As a 2026 guide in Maltby, car park resurfacing work runs at about £19–£34 per m² excluding VAT, so a 1,000 m² car park is roughly £17,650–£30,900. Guide only; the survey confirms a fixed price.
Do I need permission in Maltby?
Householder permitted development covers houses only. Car parks, yards, flats and business premises follow normal planning rules: resurfacing an existing area on the same footprint is generally fine, while a new car park, a change of use or new drainage may need permission. Check with the planning authority before any new hard area.
Where we work in and around Maltby
What applies in Maltby. We cover Maltby by grouping surveys with nearby South Yorkshire jobs; Sheffield is 11 miles away.
- Postcodes
- S66, DN11
- Area
- South Yorkshire
- Nearest towns
- Dinnington (3 miles), Conisbrough (5 miles), Rotherham (7 miles), Mexborough (7 miles)
- Pricing
- Yorkshire and the Humber, about 4% below our UK midpoint
The same service is available in Dinnington, Conisbrough, Rotherham, Mexborough, Rawmarsh.
What the price covers
Car park resurfacing renews the wearing surface of an existing car park: either an overlay, laying a new surface course on top after repairs and a bond coat, or plane and inlay, milling off the worn layer and replacing it at the same level.
- Condition survey: cores or trial holes where failure is suspected
- Failed areas cut out and rebuilt before surfacing
- Bond coat sprayed on the prepared surface
- Ironwork raised to the new level
- Lining and markings renewed
Your questions answered
Do I need permission for car park resurfacing in Maltby?
Householder permitted development covers houses only. Car parks, yards, flats and business premises follow normal planning rules: resurfacing an existing area on the same footprint is generally fine, while a new car park, a change of use or new drainage may need permission. Check with the planning authority before any new hard area.
How long does car park resurfacing take in Maltby?
Often 1–3 days for a small car park. We book Maltby surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.
What is the price of car park resurfacing in Maltby?
As a 2026 guide in Maltby, car park resurfacing work runs at about £19–£34 per m² excluding VAT, so a 1,000 m² car park is roughly £17,650–£30,900. Drainage, kerbs and lining are itemised separately.
Can I get a free survey in Maltby?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
More we do in Maltby
- Tar and chip driveways
- New tarmac driveways
- Red tarmac driveways
- Tarmac driveway resurfacing
- Car park and yard repairs
- Private and access road surfacing
- Everything in Maltby
Ready for a price in Maltby? Use the guide price tool or send the form, and we'll arrange a visit.
Car park resurfacing in Maltby: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED