New tarmac driveways in Port Glasgow

What does a new tarmac driveway cost in Port Glasgow?

For Port Glasgow, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Port Glasgow, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Port Glasgow

The key facts for Port Glasgow. Smaller towns such as Port Glasgow are surveyed alongside nearby jobs in Renfrewshire and Inverclyde.

Postcodes: PA14, PA13
Area: Renfrewshire and Inverclyde
Nearest towns: Greenock (3 miles), Dumbarton (5 miles), Vale of Leven (5 miles), Helensburgh (5 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

The same service is available in Greenock, Dumbarton, Vale of Leven, Helensburgh, Gourock.

Planning and kerb rules for Port Glasgow

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. A vehicle crossing over the footway is a separate approval, from the council as roads authority.

Questions about new tarmac driveways in Port Glasgow

How long does a new tarmac driveway take in Port Glasgow?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Port Glasgow surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

Do you work in my part of Port Glasgow?

We cover Port Glasgow including PA14, PA13, and nearby Greenock, Dumbarton, Vale of Leven.

New tarmac driveway cost in Port Glasgow: what should I budget?

As a 2026 guide in Port Glasgow, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Port Glasgow?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

More we do in Port Glasgow

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Port Glasgow.