Driveways and paths · Renfrewshire and Inverclyde

Red tarmac driveways in Port Glasgow

Planning a red tarmac driveway in Port Glasgow? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

PORT GLASGOW GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Port Glasgow?

Guide prices below are for Port Glasgow, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Port Glasgow, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Guide only; the survey confirms a fixed price.

Port Glasgow: the local details

Port Glasgow at a glance. Port Glasgow is covered on our Renfrewshire and Inverclyde rounds, 12 miles from Paisley.

Postcodes
PA14, PA13
Area
Renfrewshire and Inverclyde
Nearest towns
Greenock (3 miles), Dumbarton (5 miles), Vale of Leven (5 miles), Helensburgh (5 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Greenock, Dumbarton, Vale of Leven, Helensburgh, Gourock.

What the price covers

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Rules that apply in Port Glasgow

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

Is the survey in Port Glasgow free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Red tarmac driveway cost in Port Glasgow: what should I budget?

As a 2026 guide in Port Glasgow, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a red tarmac driveway take in Port Glasgow?

Usually 2–4 working days. We book Port Glasgow surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

Which Port Glasgow postcodes do you cover?

We cover Port Glasgow including PA14, PA13, and nearby Greenock, Dumbarton, Vale of Leven.

Other work in Port Glasgow

Tell us what you have in mind for Port Glasgow and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Port Glasgow: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price