Tarmac driveway resurfacing in Port Glasgow

How much should I budget in Port Glasgow?

For Port Glasgow, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£24–£44 per m²
Example: 30 m² drive	£810–£1,450
Example: 50 m² drive	£1,200–£2,200
Example: 80 m² drive	£1,950–£3,550

As a 2026 guide in Port Glasgow, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,550. Guide only; the survey confirms a fixed price.

Layer by layer

Planning and kerb rules for Port Glasgow

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Where we work in and around Port Glasgow

The key facts for Port Glasgow. Smaller towns such as Port Glasgow are surveyed alongside nearby jobs in Renfrewshire and Inverclyde.

Postcodes: PA14, PA13
Area: Renfrewshire and Inverclyde
Nearest towns: Greenock (3 miles), Dumbarton (5 miles), Vale of Leven (5 miles), Helensburgh (5 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

The same service is available in Greenock, Dumbarton, Vale of Leven, Helensburgh, Gourock.

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

Survey of the existing base: sinking, rutting, loose edges and drainage
Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Weed treatment and a clean surface
Bond (tack) coat sprayed to glue the new layer to the old

Port Glasgow: common questions

Do you cover all of Port Glasgow?

We cover Port Glasgow including PA14, PA13, and nearby Greenock, Dumbarton, Vale of Leven.

Tarmac resurfacing cost in Port Glasgow: what should I budget?

As a 2026 guide in Port Glasgow, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Port Glasgow?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Port Glasgow?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

More we do in Port Glasgow

Ready for a price in Port Glasgow? Use the guide price tool or send the form, and we'll arrange a visit.