Tar and chip driveways in Port Glasgow

What does a tar and chip driveway cost in Port Glasgow?

Guide prices below are for Port Glasgow, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£74 per m²
Example: 50 m² drive	£2,200–£3,700
Example: 100 m² drive	£4,400–£7,350
Example: 200 m² drive	£8,400–£13,950

As a 2026 guide in Port Glasgow, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,700. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

The build-up we price

Do I need permission in Port Glasgow?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. A vehicle crossing over the footway is a separate approval, from the council as roads authority.

Covering Port Glasgow

Port Glasgow at a glance. We cover Port Glasgow by grouping surveys with nearby Renfrewshire and Inverclyde jobs; Paisley is 12 miles away.

Postcodes: PA14, PA13
Area: Renfrewshire and Inverclyde
Nearest towns: Greenock (3 miles), Dumbarton (5 miles), Vale of Leven (5 miles), Helensburgh (5 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

We also cover nearby Greenock, Dumbarton, Vale of Leven, Helensburgh, Gourock.

Questions about tar and chip driveways in Port Glasgow

Are there planning or highway rules in Port Glasgow?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Can I get a free survey in Port Glasgow?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Port Glasgow?

Often 1–3 days depending on base work. We book Port Glasgow surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

How much does a tar and chip driveway cost in Port Glasgow?

As a 2026 guide in Port Glasgow, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Port Glasgow

Tell us what you have in mind for Port Glasgow and we'll book a survey and put the specification in writing.