Driveways and paths · Dunbartonshire

New tarmac driveways in Vale of Leven

If you are weighing up new tarmac driveways in Vale of Leven, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

VALE OF LEVEN GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Vale of Leven

For Vale of Leven, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Vale of Leven, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Vale of Leven

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Any new or widened crossing over the pavement needs approval from the council as roads authority.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Covering Vale of Leven

Survey cover and pricing for Vale of Leven. We cover Vale of Leven by grouping surveys with nearby Dunbartonshire jobs; Bearsden is 10 miles away.

Postcodes
G83
Area
Dunbartonshire
Nearest towns
Dumbarton (2 miles), Port Glasgow (5 miles), Helensburgh (6 miles), Erskine (7 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

The same service is available in Dumbarton, Port Glasgow, Helensburgh, Erskine, Greenock.

Your questions answered

How quickly can work start in Vale of Leven?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Vale of Leven surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

Can I get a free survey in Vale of Leven?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

New tarmac driveway cost in Vale of Leven: what should I budget?

As a 2026 guide in Vale of Leven, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Vale of Leven?

We cover Vale of Leven including G83, and nearby Dumbarton, Port Glasgow, Helensburgh.

Other work in Vale of Leven

Questions about new tarmac driveways in Vale of Leven? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Vale of Leven: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price