New tarmac driveways in Milngavie

What does a new tarmac driveway cost in Milngavie?

These Milngavie guide prices reflect rates in Scotland, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Milngavie, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Where we work in and around Milngavie

Milngavie at a glance. Smaller towns such as Milngavie are surveyed alongside nearby jobs in Dunbartonshire.

Postcodes: G62
Area: Dunbartonshire
Nearest towns: Bearsden (2 miles), Clydebank (4 miles), Bishopbriggs (5 miles), Renfrew (5 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

We also cover nearby Bearsden, Clydebank, Bishopbriggs, Renfrew, Erskine.

Do I need permission in Milngavie?

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Milngavie: common questions

What is the price of a new tarmac driveway in Milngavie?

As a 2026 guide in Milngavie, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Milngavie?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Will someone visit before I get a fixed price in Milngavie?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a new tarmac driveway take in Milngavie?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Milngavie surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

More we do in Milngavie

Ready for a price in Milngavie? Use the guide price tool or send the form, and we'll arrange a visit.