Driveways and paths · Dunbartonshire

Tarmac driveway resurfacing in Milngavie

For tarmac resurfacing jobs in Milngavie, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

MILNGAVIE GUIDE£24–£44 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

Tarmac resurfacing prices in Milngavie

These Milngavie guide prices reflect rates in Scotland, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£44 per m²
Example: 30 m² drive£810–£1,450
Example: 50 m² drive£1,200–£2,200
Example: 80 m² drive£1,950–£3,550

As a 2026 guide in Milngavie, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,200. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Milngavie

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

What the price covers

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Where we work in and around Milngavie

What applies in Milngavie. We cover Milngavie by grouping surveys with nearby Dunbartonshire jobs; Bearsden is 2 miles away.

Postcodes
G62
Area
Dunbartonshire
Nearest towns
Bearsden (2 miles), Clydebank (4 miles), Bishopbriggs (5 miles), Renfrew (5 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Close to Milngavie: Bearsden, Clydebank, Bishopbriggs, Renfrew, Erskine.

Milngavie: common questions

How much does tarmac resurfacing cost in Milngavie?

As a 2026 guide in Milngavie, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,200. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Milngavie?

We cover Milngavie including G62, and nearby Bearsden, Clydebank, Bishopbriggs.

Is the survey in Milngavie free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does tarmac resurfacing take in Milngavie?

Often 1–2 days for a typical drive. We book Milngavie surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

Also in Milngavie

Ready for a price in Milngavie? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac driveway resurfacing in Milngavie: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price