Tarmac driveway resurfacing in Renfrew
A good tarmac resurfacing job in Renfrew looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.
How much should I budget in Renfrew?
For Renfrew, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £24–£44 per m² |
| Example: 30 m² drive | £810–£1,450 |
| Example: 50 m² drive | £1,200–£2,200 |
| Example: 80 m² drive | £1,950–£3,550 |
As a 2026 guide in Renfrew, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,550. Guide only; the survey confirms a fixed price.
How it is built
Do I need permission in Renfrew?
In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
Renfrew: the local details
Survey cover and pricing for Renfrew. Smaller towns such as Renfrew are surveyed alongside nearby jobs in Renfrewshire and Inverclyde.
- Postcodes
- PA4, G14, G52
- Area
- Renfrewshire and Inverclyde
- Nearest towns
- Clydebank (2 miles), Erskine (3 miles), Paisley (3 miles), Bearsden (4 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
The same service is available in Clydebank, Erskine, Paisley, Bearsden, Barrhead.
What is included in tarmac resurfacing?
Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.
- Survey of the existing base: sinking, rutting, loose edges and drainage
- Cut out and patch failed areas before overlaying
- Weed treatment and a clean surface
- Bond (tack) coat sprayed to glue the new layer to the old
- New surface course, typically 25–40 mm, laid hot and rolled
Questions about tarmac resurfacing jobs in Renfrew
Do I need permission for tarmac resurfacing in Renfrew?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.
Do you cover all of Renfrew?
We cover Renfrew including PA4, G14, G52, and nearby Clydebank, Erskine, Paisley.
Will someone visit before I get a fixed price in Renfrew?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How quickly can work start in Renfrew?
Often 1–2 days for a typical drive. We book Renfrew surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.
Also in Renfrew
- Tarmac paths and footpaths
- New tarmac driveways
- Car park and yard repairs
- Private and access road surfacing
- Tar and chip driveways
- Car park resurfacing
- Everything in Renfrew
Questions about tarmac resurfacing jobs in Renfrew? Call, WhatsApp or use the form, and we'll talk it through.
Tarmac driveway resurfacing in Renfrew: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED