Tar and chip driveways in Renfrew

Tar and chip driveway prices in Renfrew

These Renfrew guide prices reflect rates in Scotland, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£74 per m²
Example: 50 m² drive	£2,200–£3,700
Example: 100 m² drive	£4,400–£7,350
Example: 200 m² drive	£8,400–£13,950

As a 2026 guide in Renfrew, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Guide only; the survey confirms a fixed price.

Do I need permission in Renfrew?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. If the job needs a dropped kerb, the council as roads authority approves it before any work on the footway.

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in
Second coat where a double dressing is specified

Layer by layer

Covering Renfrew

Renfrew at a glance. We cover Renfrew by grouping surveys with nearby Renfrewshire and Inverclyde jobs; Paisley is 3 miles away.

Postcodes: PA4, G14, G52
Area: Renfrewshire and Inverclyde
Nearest towns: Clydebank (2 miles), Erskine (3 miles), Paisley (3 miles), Bearsden (4 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

The same service is available in Clydebank, Erskine, Paisley, Bearsden, Barrhead.

Your questions answered

What approvals apply in Renfrew?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

How quickly can work start in Renfrew?

Often 1–3 days depending on base work. We book Renfrew surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

How much does a tar and chip driveway cost in Renfrew?

As a 2026 guide in Renfrew, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Renfrew?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Renfrew

Ready for a price in Renfrew? Use the guide price tool or send the form, and we'll arrange a visit.