Permeable tarmac driveways in Renfrew
A good permeable tarmac driveway in Renfrew looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

What does a permeable tarmac driveway cost in Renfrew?
These Renfrew guide prices reflect rates in Scotland, about 2% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Porous asphalt drive on a permeable stone base | £78–£122 per m² |
| Example: 30 m² drive | £2,600–£4,050 |
| Example: 50 m² drive | £3,900–£6,100 |
| Example: 80 m² drive | £6,250–£9,800 |
As a 2026 guide in Renfrew, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,100. Guide only; the survey confirms a fixed price.
Rules that apply in Renfrew
In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
Covering Renfrew
What applies in Renfrew. Renfrew is covered on our Renfrewshire and Inverclyde rounds, 3 miles from Paisley.
- Postcodes
- PA4, G14, G52
- Area
- Renfrewshire and Inverclyde
- Nearest towns
- Clydebank (2 miles), Erskine (3 miles), Paisley (3 miles), Bearsden (4 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
The same service is available in Clydebank, Erskine, Paisley, Bearsden, Barrhead.
What we do on a permeable tarmac driveway
A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.
- Geotextile separating layer on the formation
- Open-graded permeable sub-base, often Type 3 or 4/20 stone
- Porous asphalt binder and surface courses
- Overflow to a soakaway or border on slow-draining ground
- Edge restraint that does not block the flow
Layer by layer
Your questions answered
How quickly can work start in Renfrew?
Usually 3–5 working days. We book Renfrew surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.
Do you work in my part of Renfrew?
We cover Renfrew including PA4, G14, G52, and nearby Clydebank, Erskine, Paisley.
Will someone visit before I get a fixed price in Renfrew?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Do I need permission for a permeable tarmac driveway in Renfrew?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.
Other work in Renfrew
- Car park surfacing
- Tar and chip driveways
- Tarmac driveway resurfacing
- Tarmac paths and footpaths
- Car park resurfacing
- Red tarmac driveways
- Everything in Renfrew
Tell us what you have in mind for Renfrew and we'll book a survey and put the specification in writing.
Permeable tarmac driveways in Renfrew: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED