Tar and chip driveways in Milngavie

How much should I budget in Milngavie?

These Milngavie guide prices reflect rates in Scotland, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£74 per m²
Example: 50 m² drive	£2,200–£3,700
Example: 100 m² drive	£4,400–£7,350
Example: 200 m² drive	£8,400–£13,950

As a 2026 guide in Milngavie, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,700. Guide only; the survey confirms a fixed price.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Do I need permission in Milngavie?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. A vehicle crossing over the footway is a separate approval, from the council as roads authority.

Where we work in and around Milngavie

What applies in Milngavie. Milngavie is covered on our Dunbartonshire rounds, 2 miles from Bearsden.

Postcodes: G62
Area: Dunbartonshire
Nearest towns: Bearsden (2 miles), Clydebank (4 miles), Bishopbriggs (5 miles), Renfrew (5 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

We also cover nearby Bearsden, Clydebank, Bishopbriggs, Renfrew, Erskine.

How it is built

Milngavie: common questions

How long does a tar and chip driveway take in Milngavie?

Often 1–3 days depending on base work. We book Milngavie surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

Do you cover all of Milngavie?

We cover Milngavie including G62, and nearby Bearsden, Clydebank, Bishopbriggs.

Tar and chip driveway cost in Milngavie: what should I budget?

As a 2026 guide in Milngavie, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Milngavie?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Other work in Milngavie

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Milngavie.