Driveways and paths · Dunbartonshire

New tarmac driveways in Bearsden

Planning a new tarmac driveway in Bearsden? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

BEARSDEN GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Bearsden?

Guide prices below are for Bearsden, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Bearsden, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Bearsden

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. If the job needs a dropped kerb, the council as roads authority approves it before any work on the footway.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Bearsden

The key facts for Bearsden. We cover Bearsden by grouping surveys with nearby Dunbartonshire jobs; Bearsden is under a mile away.

Postcodes
G61, G15, G13, G23
Area
Dunbartonshire
Nearest towns
Milngavie (2 miles), Clydebank (3 miles), Renfrew (4 miles), Bishopbriggs (4 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

We also cover nearby Milngavie, Clydebank, Renfrew, Bishopbriggs, Glasgow.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Bearsden

How quickly can work start in Bearsden?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Bearsden surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

New tarmac driveway cost in Bearsden: what should I budget?

As a 2026 guide in Bearsden, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Bearsden?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Can I get a free survey in Bearsden?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Bearsden

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Bearsden.

Free survey for new surfacing

New tarmac driveways in Bearsden: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price