Tarmac paths and footpaths in Bearsden

How much should I budget in Bearsden?

These Bearsden guide prices reflect rates in Scotland, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£54–£88 per m²
Example: 10 m² path	£650–£1,050
Example: 20 m² path	£1,200–£1,950
Example: 40 m² path	£2,150–£3,550

As a 2026 guide in Bearsden, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Guide only; the survey confirms a fixed price.

Do I need permission in Bearsden?

Repairs, paths and edging work rarely need planning permission. In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Covering Bearsden

What applies in Bearsden. Bearsden is covered on our Dunbartonshire rounds, under a mile from Bearsden.

Postcodes: G61, G15, G13, G23
Area: Dunbartonshire
Nearest towns: Milngavie (2 miles), Clydebank (3 miles), Renfrew (4 miles), Bishopbriggs (4 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

The same service is available in Milngavie, Clydebank, Renfrew, Bishopbriggs, Glasgow.

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Questions about tarmac paths in Bearsden

How long will the work take at my Bearsden property?

Often 1–2 days. We book Bearsden surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

How much does a tarmac path cost in Bearsden?

As a 2026 guide in Bearsden, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Bearsden?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Bearsden?

We cover Bearsden including G61, G15, G13, G23, and nearby Milngavie, Clydebank, Renfrew.

More we do in Bearsden

Tell us what you have in mind for Bearsden and we'll book a survey and put the specification in writing.