Driveways and paths · Dunbartonshire

New tarmac driveways in Clydebank

If you are weighing up new tarmac driveways in Clydebank, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

CLYDEBANK GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Clydebank?

Guide prices below are for Clydebank, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Clydebank, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.

Covering Clydebank

What applies in Clydebank. Smaller towns such as Clydebank are surveyed alongside nearby jobs in Dunbartonshire.

Postcodes
G81
Area
Dunbartonshire
Nearest towns
Erskine (2 miles), Renfrew (2 miles), Bearsden (3 miles), Milngavie (4 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Close to Clydebank: Erskine, Renfrew, Bearsden, Milngavie, Paisley.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Clydebank

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Questions about new tarmac driveways in Clydebank

How long will the work take at my Clydebank property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Clydebank surveys alongside other jobs in Dunbartonshire, and give you dates once the specification is agreed.

Do you cover all of Clydebank?

We cover Clydebank including G81, and nearby Erskine, Renfrew, Bearsden.

Will someone visit before I get a fixed price in Clydebank?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

New tarmac driveway cost in Clydebank: what should I budget?

As a 2026 guide in Clydebank, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Clydebank

Questions about new tarmac driveways in Clydebank? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Clydebank: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price