Tarmac paths and footpaths in Bellshill
Homeowners in Bellshill ask us about tarmac paths for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

Tarmac path prices in Bellshill
For Bellshill, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £54–£88 per m² |
| Example: 10 m² path | £650–£1,050 |
| Example: 20 m² path | £1,200–£1,950 |
| Example: 40 m² path | £2,150–£3,550 |
As a 2026 guide in Bellshill, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Guide only; the survey confirms a fixed price.
Rules that apply in Bellshill
Repairs, paths and edging work rarely need planning permission. In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
Bellshill: the local details
The key facts for Bellshill. Smaller towns such as Bellshill are surveyed alongside nearby jobs in Lanarkshire.
- Postcodes
- ML4
- Area
- Lanarkshire
- Nearest towns
- Motherwell (2 miles), Coatbridge (3 miles), Blantyre (3 miles), Hamilton (4 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
Nearby, we work in Motherwell, Coatbridge, Blantyre, Hamilton, Airdrie.
What the price covers
Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.
- Path set out to the line and width you want
- Excavation to about 150–180 mm with spoil removed
- MOT Type 1 base, about 100 mm, compacted
- Timber, kerb or block edging on both sides
- Binder and surface course laid hot by hand and rolled
Layer by layer
Your questions answered
How long does a tarmac path take in Bellshill?
Often 1–2 days. We book Bellshill surveys alongside other jobs in Lanarkshire, and give you dates once the specification is agreed.
What approvals apply in Bellshill?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.
Can I get a free survey in Bellshill?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What is the price of a tarmac path in Bellshill?
As a 2026 guide in Bellshill, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.
Other work in Bellshill
- Tarmac driveway repairs
- Car park and yard repairs
- Tarmac driveway resurfacing
- Tar and chip driveways
- Private and access road surfacing
- Red tarmac driveways
- Everything in Bellshill
Ready for a price in Bellshill? Use the guide price tool or send the form, and we'll arrange a visit.
Tarmac paths and footpaths in Bellshill: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED