Tar and chip driveways in Bellshill
Homeowners in Bellshill ask us about tar and chip driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

Tar and chip driveway prices in Bellshill
For Bellshill, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£74 per m² |
| Example: 50 m² drive | £2,200–£3,700 |
| Example: 100 m² drive | £4,400–£7,350 |
| Example: 200 m² drive | £8,400–£13,950 |
As a 2026 guide in Bellshill, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Guide only; the survey confirms a fixed price.
How it is built
Do I need permission in Bellshill?
In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
What we do on a tar and chip driveway
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Edges set with kerbs, setts or cobbles
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
- Second coat where a double dressing is specified
Covering Bellshill
What applies in Bellshill. We cover Bellshill by grouping surveys with nearby Lanarkshire jobs; East Kilbride is 7 miles away.
- Postcodes
- ML4
- Area
- Lanarkshire
- Nearest towns
- Motherwell (2 miles), Coatbridge (3 miles), Blantyre (3 miles), Hamilton (4 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
We also cover nearby Motherwell, Coatbridge, Blantyre, Hamilton, Airdrie.
Your questions answered
Will someone visit before I get a fixed price in Bellshill?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How much does a tar and chip driveway cost in Bellshill?
As a 2026 guide in Bellshill, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.
How long does a tar and chip driveway take in Bellshill?
Often 1–3 days depending on base work. We book Bellshill surveys alongside other jobs in Lanarkshire, and give you dates once the specification is agreed.
Do I need permission for a tar and chip driveway in Bellshill?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.
Other work in Bellshill
- Front garden to tarmac driveway
- Red tarmac driveways
- Tarmac driveway resurfacing
- Car park resurfacing
- Permeable tarmac driveways
- Private and access road surfacing
- Everything in Bellshill
Tell us what you have in mind for Bellshill and we'll book a survey and put the specification in writing.
Tar and chip driveways in Bellshill: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED