Driveways and paths · Lanarkshire

Red tarmac driveways in Bellshill

Every red tarmac driveway we price in Bellshill comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BELLSHILL GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Bellshill?

Local guide rates for Bellshill (Scotland, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Bellshill, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 80 m² drive is roughly £5,900–£9,000. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Bellshill

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

What is included in a red tarmac driveway?

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Where we work in and around Bellshill

Survey cover and pricing for Bellshill. Smaller towns such as Bellshill are surveyed alongside nearby jobs in Lanarkshire.

Postcodes
ML4
Area
Lanarkshire
Nearest towns
Motherwell (2 miles), Coatbridge (3 miles), Blantyre (3 miles), Hamilton (4 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Motherwell, Coatbridge, Blantyre, Hamilton, Airdrie.

Bellshill: common questions

Is the survey in Bellshill free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a red tarmac driveway in Bellshill?

As a 2026 guide in Bellshill, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 80 m² drive is roughly £5,900–£9,000. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Bellshill?

Usually 2–4 working days. We book Bellshill surveys alongside other jobs in Lanarkshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Bellshill?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

More we do in Bellshill

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Bellshill.

Free survey for new surfacing

Red tarmac driveways in Bellshill: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price