Tarmac paths and footpaths in St Andrews
For tarmac paths in St Andrews, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

Tarmac path prices in St Andrews
For St Andrews, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £54–£88 per m² |
| Example: 10 m² path | £650–£1,050 |
| Example: 20 m² path | £1,200–£1,950 |
| Example: 40 m² path | £2,150–£3,550 |
As a 2026 guide in St Andrews, tarmac path work runs at about £54–£88 per m² including VAT, so a 20 m² path is roughly £1,200–£1,950. Guide only; the survey confirms a fixed price.
Rules that apply in St Andrews
Repairs, paths and edging work rarely need planning permission. In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
What we do on a tarmac path
Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.
- Excavation to about 150–180 mm with spoil removed
- MOT Type 1 base, about 100 mm, compacted
- Timber, kerb or block edging on both sides
- Binder and surface course laid hot by hand and rolled
- Gentle cross-fall so water runs off to the border
St Andrews: the local details
St Andrews at a glance. We cover St Andrews by grouping surveys with nearby Fife jobs; Dunfermline is 31 miles away.
- Postcodes
- KY16
- Area
- Fife
- Nearest towns
- Cupar (8 miles), Dundee (11 miles), Carnoustie (12 miles), Methil (14 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
We also cover nearby Cupar, Dundee, Carnoustie, Methil, Glenrothes.
Your questions answered
Will someone visit before I get a fixed price in St Andrews?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which St Andrews postcodes do you cover?
We cover St Andrews including KY16, and nearby Cupar, Dundee, Carnoustie.
How much does a tarmac path cost in St Andrews?
As a 2026 guide in St Andrews, tarmac path work runs at about £54–£88 per m² including VAT, so a 20 m² path is roughly £1,200–£1,950. Edging, drainage and a dropped kerb are priced separately where needed.
How quickly can work start in St Andrews?
Often 1–2 days. We book St Andrews surveys alongside other jobs in Fife, and give you dates once the specification is agreed.
Also in St Andrews
- Tar and chip driveways
- Tarmac driveway resurfacing
- New tarmac driveways
- Red tarmac driveways
- Private and access road surfacing
- Tarmac driveway repairs
- Everything in St Andrews
Questions about tarmac paths in St Andrews? Call, WhatsApp or use the form, and we'll talk it through.
Tarmac paths and footpaths in St Andrews: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED