Driveways and paths · Angus and Dundee

Tarmac paths and footpaths in Dundee

Every tarmac path we price in Dundee comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

DUNDEE GUIDE£54–£88 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Dundee?

For Dundee, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£54–£88 per m²
Example: 10 m² path£650–£1,050
Example: 20 m² path£1,200–£1,950
Example: 40 m² path£2,150–£3,550

As a 2026 guide in Dundee, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Guide only; the survey confirms a fixed price.

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled

Covering Dundee

The key facts for Dundee. Dundee is one of the bigger places we cover in Angus and Dundee, so survey slots come round regularly.

Postcodes
DD1, DD3, DD4, DD2, DD6, DD5
Area
Angus and Dundee
Nearest towns
Cupar (10 miles), Carnoustie (11 miles), St Andrews (11 miles), Forfar (12 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Cupar, Carnoustie, St Andrews, Forfar, Arbroath.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Dundee

Repairs, paths and edging work rarely need planning permission. In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Your questions answered

Are there planning or highway rules in Dundee?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Do you work in my part of Dundee?

We cover Dundee including DD1, DD3, DD4, DD2, DD6, DD5, and nearby Cupar, Carnoustie, St Andrews.

How long does a tarmac path take in Dundee?

Often 1–2 days. We book Dundee surveys alongside other jobs in Angus and Dundee, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Dundee?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Dundee

Tell us what you have in mind for Dundee and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Dundee: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price