Driveways and paths · Fife

Tarmac driveway resurfacing in St Andrews

A good tarmac resurfacing job in St Andrews looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

ST ANDREWS GUIDE£24–£44 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in St Andrews?

For St Andrews, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£44 per m²
Example: 30 m² drive£810–£1,450
Example: 50 m² drive£1,200–£2,200
Example: 80 m² drive£1,950–£3,550

As a 2026 guide in St Andrews, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 30 m² drive is roughly £810–£1,450. Guide only; the survey confirms a fixed price.

Where we work in and around St Andrews

What applies in St Andrews. Smaller towns such as St Andrews are surveyed alongside nearby jobs in Fife.

Postcodes
KY16
Area
Fife
Nearest towns
Cupar (8 miles), Dundee (11 miles), Carnoustie (12 miles), Methil (14 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Cupar, Dundee, Carnoustie, Methil, Glenrothes.

What the price covers

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • New surface course, typically 25–40 mm, laid hot and rolled

How it is built

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for St Andrews

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

St Andrews: common questions

How long does tarmac resurfacing take in St Andrews?

Often 1–2 days for a typical drive. We book St Andrews surveys alongside other jobs in Fife, and give you dates once the specification is agreed.

Do you work in my part of St Andrews?

We cover St Andrews including KY16, and nearby Cupar, Dundee, Carnoustie.

Are there planning or highway rules in St Andrews?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

How much does tarmac resurfacing cost in St Andrews?

As a 2026 guide in St Andrews, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 30 m² drive is roughly £810–£1,450. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in St Andrews

Tell us what you have in mind for St Andrews and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in St Andrews: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price