Driveways and paths · Fife

New tarmac driveways in St Andrews

If you are weighing up new tarmac driveways in St Andrews, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

ST ANDREWS GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in St Andrews?

Guide prices below are for St Andrews, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in St Andrews, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

Where we work in and around St Andrews

Survey cover and pricing for St Andrews. We cover St Andrews by grouping surveys with nearby Fife jobs; Dunfermline is 31 miles away.

Postcodes
KY16
Area
Fife
Nearest towns
Cupar (8 miles), Dundee (11 miles), Carnoustie (12 miles), Methil (14 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Cupar, Dundee, Carnoustie, Methil, Glenrothes.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Planning and kerb rules for St Andrews

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Questions about new tarmac driveways in St Andrews

Do I need permission for a new tarmac driveway in St Andrews?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

How long will the work take at my St Andrews property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book St Andrews surveys alongside other jobs in Fife, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in St Andrews?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of St Andrews?

We cover St Andrews including KY16, and nearby Cupar, Dundee, Carnoustie.

Other work in St Andrews

Tell us what you have in mind for St Andrews and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in St Andrews: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price