Tarmac paths and footpaths in Billericay

Tarmac path prices in Billericay

Guide prices below are for Billericay, adjusted for the East of England, where surfacing rates run about 5% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£58–£94 per m²
Example: 10 m² path	£690–£1,150
Example: 20 m² path	£1,250–£2,100
Example: 40 m² path	£2,300–£3,800

As a 2026 guide in Billericay, tarmac path work runs at about £58–£94 per m² including VAT, so a 40 m² path is roughly £2,300–£3,800. Guide only; the survey confirms a fixed price.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Planning and kerb rules for Billericay

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Where we work in and around Billericay

Survey cover and pricing for Billericay. Billericay sits 14 miles from Southend-on-Sea, within our regular Essex cover.

Postcodes: CM12, CM11, CM4
Area: Essex
Nearest towns: Basildon (4 miles), Wickford (5 miles), Brentwood (5 miles), Pitsea (6 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Basildon, Wickford, Brentwood, Pitsea, Stanford-le-Hope.

Billericay: common questions

Do I need permission for a tarmac path in Billericay?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Billericay?

We cover Billericay including CM12, CM11, CM4, and nearby Basildon, Wickford, Brentwood.

Can I get a free survey in Billericay?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tarmac path cost in Billericay?

As a 2026 guide in Billericay, tarmac path work runs at about £58–£94 per m² including VAT, so a 40 m² path is roughly £2,300–£3,800. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Billericay

Tell us what you have in mind for Billericay and we'll book a survey and put the specification in writing.