Driveways and paths · Essex

Red tarmac driveways in Billericay

Every red tarmac driveway we price in Billericay comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BILLERICAY GUIDE£79–£121 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Billericay?

Local guide rates for Billericay (the East of England, about 5% above our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£79–£121 per m²
Example: 30 m² drive£2,600–£4,000
Example: 50 m² drive£3,950–£6,050
Example: 80 m² drive£6,300–£9,650

As a 2026 guide in Billericay, red tarmac driveway work runs at about £79–£121 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,000. Guide only; the survey confirms a fixed price.

What is included in a red tarmac driveway?

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering

Covering Billericay

What applies in Billericay. We reach Billericay on our Essex survey days; Southend-on-Sea is 14 miles away.

Postcodes
CM12, CM11, CM4
Area
Essex
Nearest towns
Basildon (4 miles), Wickford (5 miles), Brentwood (5 miles), Pitsea (6 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Basildon, Wickford, Brentwood, Pitsea, Stanford-le-Hope.

Rules that apply in Billericay

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Billericay: common questions

Do you cover all of Billericay?

We cover Billericay including CM12, CM11, CM4, and nearby Basildon, Wickford, Brentwood.

Are there planning or highway rules in Billericay?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Red tarmac driveway cost in Billericay: what should I budget?

As a 2026 guide in Billericay, red tarmac driveway work runs at about £79–£121 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,000. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a red tarmac driveway take in Billericay?

Usually 2–4 working days. We book Billericay surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

More we do in Billericay

Questions about red tarmac driveways in Billericay? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Red tarmac driveways in Billericay: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price