Driveways and paths · Essex

New tarmac driveways in Billericay

Planning a new tarmac driveway in Billericay? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

BILLERICAY GUIDE£63–£100 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Billericay?

These Billericay guide prices reflect rates in the East of England, about 5% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£63–£100 per m²
Example: 30 m² drive£2,100–£3,300
Example: 50 m² drive£3,150–£5,000
Example: 80 m² drive£5,050–£8,000

As a 2026 guide in Billericay, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Guide only; the survey confirms a fixed price.

Covering Billericay

Survey cover and pricing for Billericay. Billericay is 14 miles from Southend-on-Sea, and we survey there as part of Essex cover.

Postcodes
CM12, CM11, CM4
Area
Essex
Nearest towns
Basildon (4 miles), Wickford (5 miles), Brentwood (5 miles), Pitsea (6 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Basildon, Wickford, Brentwood, Pitsea, Stanford-le-Hope.

Do I need permission in Billericay?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Your questions answered

How long does a new tarmac driveway take in Billericay?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Billericay surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

Do you cover all of Billericay?

We cover Billericay including CM12, CM11, CM4, and nearby Basildon, Wickford, Brentwood.

Is the survey in Billericay free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Billericay?

As a 2026 guide in Billericay, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Billericay

Tell us what you have in mind for Billericay and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Billericay: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price