Driveways and paths · Essex

New tarmac driveways in Basildon

Homeowners in Basildon ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

BASILDON GUIDE£63–£100 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Basildon?

Local guide rates for Basildon (the East of England, about 5% above our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£63–£100 per m²
Example: 30 m² drive£2,100–£3,300
Example: 50 m² drive£3,150–£5,000
Example: 80 m² drive£5,050–£8,000

As a 2026 guide in Basildon, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 50 m² drive is roughly £3,150–£5,000. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Basildon

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Basildon

Basildon at a glance. We cover Basildon as part of our regular Essex rounds.

Postcodes
SS16, SS14, SS15
Area
Essex
Nearest towns
Pitsea (2 miles), Stanford-le-Hope (3 miles), Wickford (4 miles), Billericay (4 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Close to Basildon: Pitsea, Stanford-le-Hope, Wickford, Billericay, South Benfleet.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Basildon

Do I need permission for a new tarmac driveway in Basildon?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a new tarmac driveway in Basildon?

As a 2026 guide in Basildon, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 50 m² drive is roughly £3,150–£5,000. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Basildon?

We cover Basildon including SS16, SS14, SS15, and nearby Pitsea, Stanford-le-Hope, Wickford.

Is the survey in Basildon free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Basildon

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Basildon.

Free survey for new surfacing

New tarmac driveways in Basildon: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price