Driveways and paths · Essex

Red tarmac driveways in Pitsea

For red tarmac driveways in Pitsea, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

PITSEA GUIDE£79–£121 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Pitsea?

Local guide rates for Pitsea (the East of England, about 5% above our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£79–£121 per m²
Example: 30 m² drive£2,600–£4,000
Example: 50 m² drive£3,950–£6,050
Example: 80 m² drive£6,300–£9,650

As a 2026 guide in Pitsea, red tarmac driveway work runs at about £79–£121 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,000. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a red tarmac driveway?

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Pitsea: the local details

What applies in Pitsea. Smaller towns such as Pitsea are surveyed alongside nearby jobs in Essex.

Postcodes
SS13
Area
Essex
Nearest towns
Basildon (2 miles), South Benfleet (2 miles), Wickford (3 miles), Canvey Island (4 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Close to Pitsea: Basildon, South Benfleet, Wickford, Canvey Island, Stanford-le-Hope.

Rules that apply in Pitsea

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Pitsea: common questions

Can I get a free survey in Pitsea?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Pitsea?

Usually 2–4 working days. We book Pitsea surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

Do you cover all of Pitsea?

We cover Pitsea including SS13, and nearby Basildon, South Benfleet, Wickford.

What approvals apply in Pitsea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Pitsea

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Pitsea.

Free survey for new surfacing

Red tarmac driveways in Pitsea: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price